Double Sided Sand Maker

Double sided cubit or sandstone is suitable for crushing soft rocks and rocks, its inlet size being 0 to 2 mm and the outlet size being between 0 to 1 mm.
The production capacity of this machine is 3 tons per hour.
This type of sandblast has a similar function to Kubite, except that it has anchors on both sides, and the rotor spacing is smaller with impellers, which increases the impact and increases the amount of sand.

Double Sided Sand Maker components
Shaft and Rotor, Hinges, Hammer, Hammer Shaft, Anchor, Anchor Shaft, Hammer Spring, Bearing, Rotor Hinge, Bumpers, Bolts, Armrest

Double Sided Sand Maker Benefits
The hammers are interchangeable in three slot grooves with six edges for six turns and up to 80% Are used.
The device has a high corrosion power despite the large number of impact surfaces at high speeds.
The machine is equipped with adjusting screws to adjust the output load grading.
The machine has less propulsion due to the relatively high inertia of the rotor.
The hammers in this machine are replaced in a short period of time.
Consumables are plentiful and have good prices.
This machine is suitable for crushing hard stones.